my 8 year old son wants RGB fans on his new case please help me :(

Hey guys i think the motherboard my son has is a 

i am not sure if this motherboard is even compatible with rgb (i hope it is) i am seeing pictures of the motherboard and it has a 4 pin 12v grb connector on it? and a 4 pin pwn fan connector? 

i am so lost i went on google and i found this forum please someone help me my son really wants rgb fans on his new case the case is a corsair 4000D airflow 

i found these fans will these work with his motherboard? 

https://www.amazon.com/gp/product/B0BKKFBR9R/ref=ppx_yo_dt_b_asin_title_o02_s00?ie=UTF8&th=1

Hi, Welcome to BC.

This is your GIGABYTE H610M S2H Motherboard Support Page : https://www.gigabyte.com/Motherboard/H610M-S2H-rev-10/support#support-dl-bios

Please make sure you have all your drivers and Current F8a Bios installed as well as the utilities.

The motherboard supports ambient LED Light with the proper utility installed.

The case will run any LED lights want to put into it.

A word of caution : RPM is speed and will be noise also. Air Flow is measured by Volume of air moved and some cases as set up to be negative or positive or static.

So it is possible to screw up your air flow by sticking in the wrong fans.

These would be the quality fans I would suggest : https://www.amazon.com/noctua-rgb/s?k=noctua+rgb

Note : Corsair has the best software to control all there stuff in one place including RGB

But yes you can stick in pretty much what you want including from your URL.

Edited by Pkshadow, 10 November 2023 - 09:44 PM.

well guys i purchased the fans and when i went too install the fans i found out that the mother board did not have 5v 3pin argb headers.

well this forum was no help i went on toms hardware and they pointed me in the right direction i had to purchase a adapter that used a usb2.0 header on my motherboard and turned that into 6 5v 3pin argb headers..... 

thanks for wasting my time and telling me that my fans were compatible with my motherboard when the fans required 5v 3pin argb headers and my motherboard had 0..........

seriously........